English
Chinese
Digital quantity module
Home > Products > Pull back spring type> Digital quantity module > UE20-8DO-P
Product search
Product Catalog
1, The digital output module has 8 channels, and the width is only 12 mm
2, Support digital source type output, PNP type high level effective
3, It can transmit the binary control signal of the automation equipment to the connected actuator (such as solenoid valve, contactor, transmitter, relay or Other electrical loads) on
4, The module adopts Push-in CAGE CLAMP technology, which allows a single strand of wire to be inserted directly
2, Support digital source type output, PNP type high level effective
3, It can transmit the binary control signal of the automation equipment to the connected actuator (such as solenoid valve, contactor, transmitter, relay or Other electrical loads) on
4, The module adopts Push-in CAGE CLAMP technology, which allows a single strand of wire to be inserted directly
| Specification | |
| Product | UE20-8DO-P |
| Number of channels | 8 |
| Data size | 1 Byte |
| Signal type | PNP |
| "OFF" signal voltage | DC 0V(±3%) |
| "ON" signal voltage | DC 24V(+25%) |
| Connection type | 1-line |
| Reverse protection | Yes |
| lsolation method | Photoelectric isolation |
| Fault diagnosis | Yes |
| Power Supply Parameters | |
| Connection type | Spring terminal blocks |
| Working voltage | 24V DC +20 % / -15 % |
| System feed current | <19mA |
| Maximum area of wire | 2.5mm2 |
| Maximum area of wire | AWG14 |
| The minimum area of a wire | 0.2mm2 |
| The minimum area of a wire | AWG28 |
| Strip length | 8~9mm |
| Mechanical Structure | |
| Protection grade | IP20 |
| Size(H x W x D) | 100mmX12mmX68mm |
| Installation type | 35mm DIN |
| Work Environment | |
| Working temperature | -10-55℃ |
| Storage temperature | -20-85℃ |
| Relative humidity | 5~95%RH(non-condensing) |
