English
Chinese
Analog module
Home > Products > PUSH-IN In-Line (UF20 series)> Analog module > UF20-4AO-U-16
Product search
Product Catalog
UF20-4AO-U-16
Analog output module, 4 ports,(0…+5V)(-5…+5V)(0…+10V)(-10…+10V) voltage type
1, The analog output module has 4 channels, and the width is only 12 mm
2, The analog output module can receive 0~5V, ±5V, ±10V, 0~10V standard signals
3, The output signal of each channel is electrically isolated and transmitted in the form of 16-bit resolution
4, The module is powered by the system power supply (through the internal data bus)
5, The shield end can be directly connected with DIN rail
| Specification | |
| Product | UF20-4AO-U-16 |
| Number of channels | 4 |
| Data size | 8 Byte |
| Measuring range | (0…+5V)(-5…+5V)(0…+10V)(-10…+10V) Configurable |
| Signal type | Differential signal |
| Connection type | 2-line |
| Overcurrent protection | Yes |
| Isolation method | Magnetic isolation |
| Fault diagnosis | Yes |
| Resolution | 16 Bit |
| Precision | 0.10% |
| Temperature coefficient | <20 ppm |
| Conversion time | ≤1ms |
| Load impedance | >5KΩ |
| Power Supply Parameters | |
| Connection type | PUSH-IN terminal blocks |
| WVorking voltage | 24V DC +20 % / -15 % |
| System supply current | <230mA |
| Maximum area of wire | 1.5mm² |
| Maximum area of wire (AVVG) | AWG16 |
| The minimum area of a wire | 0.34mm² |
| The minimum area of a wire (AVVG) | AWG22 |
| Strip length | 8~10mm |
| Mechanical Structure | |
| Protection grade | IP20 |
| Size(H x W x D) | 75mmX12mmX105mm |
| Installation type | 35mm DIN |
| Work Environment | |
| Working temperature | -10-55℃ |
| Storage temperature | -20-85℃ |
| Relative humidity | 5~95%RH(non-condensing) |
