English
Chinese
I/O adapter terminal block
Home > Products > Terminal block> I/O adapter terminal block > ETS-16L
Product search
Product Catalog
ETS-16L
With 20P MIL connector as the inlet end,
It corresponds to any 16-bit input/output PLC module in the market
It corresponds to any 16-bit input/output PLC module in the market
1, ETS-16L adopts 20P MIL connector as the incoming end, which can directly correspond to any PLC module with 16-bit input/output on the market
Block and arrange into 2 sets of 8-bit terminals
2, Each with LED status indicator, so that the use is clear, so that the wiring work becomes easier, miniaturized design, so that the wiring box more tidy
3, NPN/PNP bipolar input corresponding, and the indicator will follow the input signal is different and bright different colors (green -NPN; Yellow -PNP)
Block and arrange into 2 sets of 8-bit terminals
2, Each with LED status indicator, so that the use is clear, so that the wiring work becomes easier, miniaturized design, so that the wiring box more tidy
3, NPN/PNP bipolar input corresponding, and the indicator will follow the input signal is different and bright different colors (green -NPN; Yellow -PNP)
| Specification parameter | |
| Name of product | ETS-16L |
| Rated voltage | 24VDC |
| Rated current | 1A |
| Withstand voltage | AC500V min |
| Insulation resistance | ＞100MΩ以上(DC500V) |
| Suitable wire | 1.25mm²/AWG16 |
| Ambient temperature range | -10℃~+50℃(no icing or condensation) |
| LED status indicator | |
| Red | Light up when the power is ON |
| Green | Light up when the signal comes in |
