English
Chinese
EtherCAT Branch
Home > Products > EtherCAT Branch> EtherCAT Branch > GW-EC-P06
Product search
Product Catalog
1、Supports the switch cascading function.
2、Based on high-performance EtherCAT ASIC communication chip, faster.
3、Configuration is simple and supports major mainstream EtherCAT master stations.
4、The power supply system supports reverse protection and short circuit protection.
| Communication parameter | ||
| Model number | GW-EC-P06 | |
| Communication protocol | EtherCAT slave station | |
| Number of interfaces | 6 * RJ45 (1 in 5 out) | |
| Transmission rate | 10/100M speed adaptive | |
| Distributed clock | Yes | |
| Topological structure | Linear, star, tree, etc | |
| Delay | About 1 microsecond per port | |
| Ring network redundancy | Yes | |
| The network port is hot swapped | Yes | |
| Communication distance | ≤100 m (station distance) | |
| Isolation mode | Electrical isolation from field floor | |
| Transmission medium | Ethernet/EtherCAT CAT5 cable | |
| Power supply parameter | ||
| Connection mode | 3P Insert and remove the terminal | |
| Operating voltage | 18~28V DC | |
| System feed current | <150mA | |
| The maximum crimp area of the wire | 1.5mm² | |
| Maximum crimp area of conductor (AWG) | AWG16 | |
| The minimum crimp area of the wire | 0.34mm² | |
| Minimum crimp area of conductor (AWG) | AWG22 | |
| Strip length | 9mm | |
| Basic parameter | ||
| Class of protection | IP20 | |
| Overall dimensions (H X W X D) | 86 mm X 116 mm X 33 mm | |
| Operating temperature | -10 ~ 55°C | |
| Storage temperature | -20 ~ 85°C | |
| Relative humidity | 95% (non-condensing) | |
| Authentication | CE | |
| Altitude | Below 2000 m (80kPa) | |
| Pollution level | Level 2 | |
| Immunity to interference | Power cable 2kV (IEC 61000-4-4) | |
| Overvoltage class | II | |
| EMC anti-interference level | Zone B，IEC61131-2 | |
| Vibration resistance | IEC 60068-2-6 | |
| 5Hz ~ 8.4Hz, amplitude 3.5mm, 8.4Hz ~ 150Hz, acceleration 9.8m /s2, X, Y, Z | ||
| 100 minutes in each direction (10 times, 10 minutes each, 100 minutes in total) | ||
| Impact resistance | IEC 60068-2-27, 9.8m/s2, 11ms, X/Y/Z, 3 times each in 3 axes and 6 directions | |
| LED status | ||
| PWR | On: The power supply to the branch is normal | |
| Off: The power supply to the branch is abnormal | ||
| LINK* | On: The network connection of the corresponding channel is valid | |
| ACT* | Blinking: There is data communication on the corresponding channel | |
