English
Chinese
Digital quantity module
Home > Products > PUSH-IN In-Line (UC20 series)> Digital quantity module > UC20-8DI-NP
Product search
Product Catalog
1, The digital input module has 8 channels, and the width is only 12 mm
2, Support source type or leakage type input, input PNP type high level is effective or NPN type low level is effective
3, It can receive field side (such as: sensor, encoder, switch or proximity switch) binary control signal
4, The module adopts Push-in CAGE CLAMP technology, allowing a single strand of wire to be inserted directly
5, Filter time can be set
2, Support source type or leakage type input, input PNP type high level is effective or NPN type low level is effective
3, It can receive field side (such as: sensor, encoder, switch or proximity switch) binary control signal
4, The module adopts Push-in CAGE CLAMP technology, allowing a single strand of wire to be inserted directly
5, Filter time can be set
| Specification | |
| Product | UC20-8DI-NP |
| Number of channels | 8 |
| Data size | 1 Byte |
| Signal type | NPN&PNP |
| "OFF" signal voltage(NPN) | 15V-30V |
| "ON" signal voltage(NPN) | -3V-3V |
| "OFF" signal voltage(PNP) | -3V-3V |
| "ON" signal voltage(PNP) | 15V-30V |
| Connection type | 1-line |
| Reverse protection | Yes |
| lsolation method | Photoelectric isolation |
| Fault diagnosis | Yes |
| Power Supply Parameters | |
| Connection type | PUSH-IN terminal blocks |
| WVorking voltage | 24V DC +20 % / -15 % |
| System supply current | <52mA |
| Maximum area of wire | 1.5mm² |
| Maximum area of wire (AVVG) | AWG16 |
| The minimum area of a wire | 0.34mm² |
| The minimum area of a wire (AVVG) | AWG22 |
| Strip length | 8~10mm |
| Mechanical Structure | |
| Protection grade | IP20 |
| Size(H x W x D) | 75mmX12mmX105mm |
| Installation type | 35mm DIN |
| Work Environment | |
| Working temperature | -10-55℃ |
| Storage temperature | -20-85℃ |
| Relative humidity | 5~95%RH(non-condensing) |
