English
Chinese
Digital quantity module
Home > Products > PUSH-IN In-Line (UC20 series)> Digital quantity module > UC20-16DO-P
Product search
Product Catalog
1, The digital output module has 16 channels, and the width is only 12 mm
2, Support digital source type output, PNP type high level effective
3, It can transmit the binary control signal of the automation equipment to the connected actuator (such as solenoid valve, contactor, transmitter, relay or other electrical load)
4, The module adopts Push-in CAGE CLAMP technology, allowing a single strand of wire to be inserted directly
2, Support digital source type output, PNP type high level effective
3, It can transmit the binary control signal of the automation equipment to the connected actuator (such as solenoid valve, contactor, transmitter, relay or other electrical load)
4, The module adopts Push-in CAGE CLAMP technology, allowing a single strand of wire to be inserted directly
| Specification | |
| Product | UC20-16DO-P |
| Number of channels | 16 |
| Data size | 2 Byte |
| Signal type | PNP |
| “OFF” signal voltage | DC 0V(±3%) |
| “ON” signal voltage | DC 24V(±25%) |
| Connection type | 1-line |
| Reverse protection | Yes |
| Isolation method | Photoelectric isolation |
| Fault diagnosis | Yes |
| Power Supply Parameters | |
| Connection type | PUSH-IN terminal blocks |
| WVorking voltage | 24V DC +20 % / -15 % |
| System supply current | <66mA |
| Maximum area of wire | 1.5mm² |
| Maximum area of wire (AVVG) | AWG16 |
| The minimum area of a wire | 0.34mm² |
| The minimum area of a wire (AVVG) | AWG22 |
| Strip length | 8~10mm |
| Mechanical Structure | |
| Protection grade | IP20 |
| Size(H x W x D) | 75mmX12mmX105mm |
| Installation type | 35mm DIN |
| Work Environment | |
| Working temperature | -10-55℃ |
| Storage temperature | -20-85℃ |
| Relative humidity | 5~95%RH(non-condensing) |
