English
Chinese
Analog module
Home > Products > PUSH-IN In-Line (UC20 series)> Analog module > UC20-4AO-I-16
Product search
Product Catalog
1, The analog output module has 4 channels, and the width is only 12 mm
2, The analog output module can output 0-20mA, 4-20mA differential signal
3, The output signal of each channel is electrically isolated and transmitted in the form of 16-bit resolution
4, The module is powered by the system power supply (through the internal data bus)
5, The shield end can be directly connected with DIN rail
2, The analog output module can output 0-20mA, 4-20mA differential signal
3, The output signal of each channel is electrically isolated and transmitted in the form of 16-bit resolution
4, The module is powered by the system power supply (through the internal data bus)
5, The shield end can be directly connected with DIN rail
| Specification | |
| Product | UC20-4AO-I-16 |
| Number of channels | 4 |
| Data size | 8 Byte |
| Measuring range | Current mode (0...20mA)(4...20mA) Configurable |
| Signal type | Differential signal |
| Connection type | 2-line |
| Overcurrent protection | Yes |
| Isolation method | Magnetic isolation |
| Fault diagnosis | Yes |
| Resolution | 16 Bit |
| Precision | 0.10% |
| Temperature coefficient | <20 ppm |
| Conversion time | ≤1ms |
| Load impedance | <500Ω |
| Power Supply Parameters | |
| Connection type | PUSH-IN terminal blocks |
| WVorking voltage | 24V DC +20 % / -15 % |
| System supply current | ＜48mA |
| Maximum area of wire | 1.5mm² |
| Maximum area of wire (AVVG) | AWG16 |
| The minimum area of a wire | 0.34mm² |
| The minimum area of a wire (AVVG) | AWG22 |
| Strip length | 8~10mm |
| Mechanical Structure | |
| Protection grade | IP20 |
| Size(H x W x D) | 75mmX12mmX105mm |
| Installation type | 35mm DIN |
| Work Environment | |
| Working temperature | -10-55℃ |
| Storage temperature | -20-85℃ |
| Relative humidity | 5~95%RH(non-condensing) |
