English
Chinese
Digital quantity module
Home > Products > PUSH-IN In-Line (UC20 series)> Digital quantity module > UC20-8DO-R
Product search
Product Catalog
1, The digital output module has 8 channels, and the width is only 24mm
2, Support digital relay output
3, It can transmit the binary control signal of the automation equipment to the connected actuator (such as solenoid valve, contactor, transmitter, relay or other electrical load)
4, The module adopts Push-in CAGE CLAMP technology, allowing a single strand of wire to be inserted directly
2, Support digital relay output
3, It can transmit the binary control signal of the automation equipment to the connected actuator (such as solenoid valve, contactor, transmitter, relay or other electrical load)
4, The module adopts Push-in CAGE CLAMP technology, allowing a single strand of wire to be inserted directly
| Specification parameter | |
| The name of a product or commodity | UC20-8DO-R |
| Number of channels | 8 |
| Data size | 1 Byte |
| Signal type | relay |
| Load type | Resistive load, inductive load, lamp load |
| Single channel rated current | Max：2A |
| Single channel rated voltage | Max：230VAC / 30VDC |
| Isolated withstand voltage | 1500VAC |
| Isolation mode | Optocoupler isolation + relay isolation |
| Module abnormal self recovery | Yes |
| Diagnosis | Yes |
| Give an alarm | Yes |
| Firmware upgrade | Yes |
| Power Supply Parameters | |
| Connection type | PUSH-IN terminal blocks |
| Working voltage | 24V DC +20%/-15% |
| Maximum area of wire | 1.5mm² |
| Maximum area of wire (AWG) | AWG16 |
| The minimum area of a wire | 0.34mm² |
| The minimum area of a wire (AWG) | AWG22 |
| Strip length | 8~10mm |
| Mechanical Structure | |
| Protection grade | IP20 |
| Size(H x W x D) | 75mmX24mmX105mm |
| Installation type | 35mm DIN |
| Work Environment | |
| Working temperature | -10-55℃ |
| Storage temperature | -20-85℃ |
| Relative humidity | 5-95%RH(non-condensing) |
