English
Chinese
Digital quantity module
Home > Products > PUSH-IN In-Line (UC20 series)> Digital quantity module > UC20-32DO-P-M
Product search
Product Catalog
1, The digital output module has 32 channels, and the width is only 24mm
2, Support digital leakage type output, PNP type low level effective
3, It can transmit the binary control signal of the automation equipment to the connected actuator (such as solenoid valve, contactor, transmitter, relay or other electrical load)
4, The module adopts MIL connection
2, Support digital leakage type output, PNP type low level effective
3, It can transmit the binary control signal of the automation equipment to the connected actuator (such as solenoid valve, contactor, transmitter, relay or other electrical load)
4, The module adopts MIL connection
| Specification | |
| Product | UC20-32DO-P-M |
| Number of channels | 32 |
| Data size | 4 Byte |
| Signal type | PNP |
| "OFF" signal voltage | DC 0V(±3%) |
| "ON" signal voltage | DC 24V(±25%) |
| Connection type | 1-line |
| Reverse protection | Yes |
| lsolation method | Photoelectric isolation |
| Fault diagnosis | Yes |
| Power Supply Parameters | |
| Connection type | MIL connector |
| WVorking voltage | 24V DC +20 % / -15 % |
| Mechanical Structure | |
| Protection grade | IP20 |
| Size(H x W x D) | 75mmX24mmX105mm |
| Installation type | 35mm DIN |
| Work Environment | |
| Working temperature | -10-55℃ |
| Storage temperature | -20-85℃ |
| Relative humidity | 5~95%RH(non-condensing) |
