English
Chinese
Digital quantity module
Home > Products > High-speed PUSH-IN in line> Digital quantity module > UK20-32DO-N
Product search
Product Catalog
| Technical parameters | ||
| Product name | UK20-32DO-N | |
| Connection technology | Single-wire system | |
| The bit width in the process image | 32 outputs | |
| Data size | 4 Byte | |
| Signal type | NPN | |
| OFF signal voltage | 24V DC(±25%) | |
| ON signal voltage | 0V DC(±3%) | |
| Rated voltage | 24 V DC（-15%/+20%） | |
| Load type | Resistive load, inductive load, lamp load | |
| Distributed clock | – | |
| Maximum output current | 0.5A per channel (short-circuit protection) | |
| Short-circuit current | The typical value is < 7 A | |
| Reverse voltage protection | is | |
| Fracture energy | < 100 mJ/ channel | |
| Switching time | Typical value TON: 50 µs, typical value TOFF: 200 µs | |
| E-bus current consumption | Typical value: 55 mA | |
| Power contact current consumption | Typical value: 90 mA + load | |
| Configuration | No address or configuration Settings are required | |
| Electrical isolation | 500 V (E-bus/ field potential) | |
| Weight | About 100 g | |
| Working temperature | -25…+60 °C | |
| Storage temperature | -40…+85 °C | |
| Relative humidity | 95%, no condensation | |
| Anti-vibration/anti-impact performance | Comply with the EN 60068-2-6/EN 60068-2-27 standard | |
|
Anti-electromagnetic interference |
Comply with the EN 61000-6-2 standard |
|
| Anti-electromagnetic radiation performance | Comply with the EN 61000-6-4 standard | |
| Protection level/installation location | IP20 | |
| Pluggable wiring | Support | |
| Certification | CE | |
| Shell data | ||
| Connection method | PUSH-IN terminal block | |
| External dimensions (W x H x D) | 24 mm x 105 mm x 75 mm | |
| Installation method | It is fixed on a 35mm DIN rail by a lock and complies with the EN 60715 standard | |
| Side-by-side installation method | Dual slots | |
| Wiring | Solid wire (s), flexible wire (st) and tubular terminal (f) : Drive the spring with a screwdriver | |
| Cross-sectional area of the wire |
s*：0.34...1.5 mm²、 st*：0.34...1.5 mm²、 f*：0.34...1.5 mm² |
|
| Cross-sectional area of the wire AWG |
s*：AWG22...16、 st*：AWG22...16、 f*：AWG22...16 |
|
| Stripping length | 8…10 mm | |
| Power contact current load | Imax:10 A | |
