English
Chinese
Analog module
Home > Products > High-speed PUSH-IN in line> Analog module > UK20-4AI-U-16
Product search
Product Catalog
| Technical parameters | ||
| Product name | UK20-4AI-U-16 | |
| Signal Type |
Voltage type (0...+5V/(-5...+5V)/0...+10V/(-10...+10V)) configurable |
|
|
Bit width in the process image |
4 outputs | |
| Data size | 8 Byte | |
| Signal type | Differential | |
| Connection Type | 2-wire system | |
| Isolation Method | Isolated from field layer | |
| Internal Resistance |
>500KΩ |
|
| Conversion Time |
<1ms |
|
|
Resolution |
16 Bit | |
| Accuracy |
0.5% |
|
|
Error Diagnosis |
Supported |
|
| Configuration | No address or configuration required | |
| Electrical isolation | 500 V (E-bus/field potential) | |
| Weight | Approx. 70 g | |
| Operating temperature | -25…+60 °C | |
| Storage temperature | -40…+85 °C | |
| Relative humidity | 95%, no condensation | |
| Anti-vibration/anti-impact performance | Complies with EN 60068-2-6/EN 60068-2-27 standards | |
| Anti-electromagnetic interference | Comply with the EN 61000-6-2 standard | |
| Anti-electromagnetic radiation performance |
Comply with the EN 61000-6-4 standard |
|
| Protection level/installation location | IP20 | |
|
Pluggable wiring |
Support |
|
| Certification | CE | |
| Shell data | ||
| Connection method |
PUSH-IN terminal block |
|
| External dimensions (W x H x D) | 12 mm x 105 mm x 75 mm | |
| Installation method | It is fixed on a 35mm DIN rail by a lock and complies with the EN 60715 standard | |
| Side-by-side installation method | Dual slots | |
| Wiring | Solid wire (s), flexible wire (st) and tubular terminal (f) : Drive the spring with a screwdriver | |
| Cross-sectional area of the wire |
s*：0.34...1.5 mm²、 st*：0.34...1.5 mm²、 f*：0.34...1.5 mm² |
|
| Cross-sectional area of the wire AWG |
s*：AWG22...16、 st*：AWG22...16、 f*：AWG22...16 |
|
| Stripping length | 8…10 mm | |
| 电源触点电流负载 | Imax:10 A | |
